Pioneer RM-V1000NU Technical Manual page 92

[8] To return the convergence and white balance adjustment data to that at shipment:
1) Set the adjustment mode.
2) Press the
7
Select [7. MEMORY READ/COPY].
3) Select the number from the SUB MENU.
key : The convergence and deflection adjustment data will return to that at shipment.
1
key : The white balance adjustment data will return to that at shipment.
2
[9] To copy the convergence adjustment data between memories:
1) Set the adjustment mode.
2) Press the 7
Select [7. MEMORY READ/COPY].
3) Press the 4
Select [4. CONV. MEMORY COPY].
4) Select the copy pattern (keys 1 to 6).
5) If the copy pattern number is correct, press the
be displayed again.)
If the copy pattern number is wrong, press the
[10] Resetting the setting
1) Set the adjustment mode.
2) Press the 7
Select [7. MEMORY READ/COPY].
3
3) Press the
As a result, the following settings will be set.
• MULTI (Peripheral light amount correction)=ON
• TV SYSTEM=AUTO
• Convergence memory
NTSC input (VIDEO, Y/C, RGB)=MEMO-1
PAL input (VIDEO, Y/C, RGB)=MEMO-2
The adjustments using the above settings can be performed very easily.
Example : When the baud rate of each MPJ is set to 2400 bps as they are not same.
1 Press the
2 Press the
3 Press the
• To set the baud rate to 4800 bps, proceed onto step 7.
4 Press the
5 Press the
6 Press the
7 Press the
The adjustment is completed.
key.
key.
key of the SUB MENU.
key.
key of the SUB MENU.
key. (To set the adjustment mode).
ADJ IN
7
key (To select [7. MEMORY READ/COPY].)
3
key (As the SUB MENU is selected, 4800 bps will be selected automatically.)
6
key. (Returns to the main menu).
2 key (Select [2. OPERATION MODE]).
key (As the baud rate changes cyclically, 2400 bps is selected.)
7
key to select a baud rate.
ADJ OUT
0 key within 5 seconds. (If not, the copy pattern will
key and repeat from step 2 again.
MAIN MENU
• Baud rate=4800 bps • COLOR MODE=1
• VIDEO MUTE=OFF
ADJUSTMENTS
• COMBINATION=OFF
91