Special Installation; Wall Inset; Diagonal Installation; Architrave Processing - Pioneer RM-V1000NU Technical Manual

Examples of System
(1) Enlarged display only
C.VIDEO
LDP
To MVP input
(2) Multi display
LDP 1
LDP 2
LDP 3
LDP 4
Switching of Displays
¶ Enlarged display
¶ Multi display

5. SPECIAL INSTALLATION

(1) Wall inset

¶ When fixing the screen into the wall, leave space at the top, bottom, left and right sides for attaching and
removing the screen.

(2) Diagonal installation

¶ This system cannot be placed facing upwards or downwards and diagonally. Always place it horizontally.

(3) Architrave processing

¶ When enclosing the screen with a frame, etc., add 15 mm
to the dimensions of the assembled screen at the top, bot-
tom, left, and right. (Fig.3-15)
* Perform framing constructions after assembling the
screen.
¶ If light leaks from the rear space after constructions, place
a blind plate over the rear.

(4) Upside down installation

¶ Not possible

(5) Hanging from ceiling

¶ Not possible
RM-V1000NU/
RM-V1000NA
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MPJ input
To C. VIDEO MVP input
RS-232C
Personal computer
for control
1 Select the signal displayed by the matrix SW, and send the signal line to the
MVP.
2 Set the MPJ input to RGB.
1 Select the signal displayed by the matrix SW, and send the signal line of the
MPJ.
2 Set the MPJ input to C. VIDEO.
INSTALLATION AND ASSEMBLY
LDP 1
LDP 2
C.VIDEO
To MVP
LDP 3
input
LDP 4
MVP
To MPJ
RS-232C
15 mm
15 mm
(Fig. 3-15)
RM-V1000NU/
RM-V1000NA
To each MPJ
RGB input
15 mm
15 mm
33