Carrying The Units After Opening Packaging - Pioneer RM-V1000NU Technical Manual

INSTALLATION AND ASSEMBLY

(3) Carrying the Units After Opening Packaging

1 Screen
To carry the screen unit after opening the packaging, hold them by the parts shown in the figure, and lift and
move them.
¶ Never drag the system along the floor when moving the units.
¶ The lenticular sheet damages very easily as it is very thin. Therefore move it gently and do not apply excessive
shock or vibration to it.
¶ As the panels supporting the screen are very thin and deform easily, be careful that they do not hit or get
hooked onto surrounding objects when moving them.
2 Unit
¶ When moving the unit, push the frame (square) without pushing the rear panel. Never push to the front or
back.
¶ Do not move the system on casters on rough places such as tiles and bricks.
¶ Do not move the system after installation.
26
(Fig. 3-5)
1 2 3 4 5 6 7 8 9 0 1 2
1 2 3 4 5 6 7 8 9 0 1 2
1 2 3 4 5 6 7 8 9 0 1 2
Hold the shaded parts.
1 2 3 4 5 6 7 8 9 0 1 2
1 2 3 4 5 6 7 8 9 0 1 2
(Lifted by one or two persons)
Hold the parts indicated by