Selecting The Audio Languages; Selecting The Digital Output Format; Checking The Digital Signal Strength; Displaying Tv Status Information On-Screen - Toshiba 42HP66 Owner's Manual

÷
÷
Selecting the audio languages
When two or more audio languages are included in a digital signal, you
can select one of the audio languages
To select the audio language:
1. Press TV to select the TV mode.
2. Press MENU, then press _ orl_ to
display the AUDIO menu.
3. Press • or • to highlight AUDIO
LANGUAGE, then press _.
4. Press • or • to select the desired
language, then press ENTER.
5. Press EXIT to return to normal viewing.
AUDIO
A
OIGITAL OUTPUT PCM
r_ESET
_-_,,SELECT =__,,AOJUST
Selecting the digital output format
You can choose the format of the digital audio output signal.
To select the digital output format:
1. Press TV to select the TV mode.
2. Press MENU, then press _i or _, to .....
display the AUDIO menu _............
3 Press • or • to highlight DIGITAL
OUTPUT. .....
4 Press *_ or I_ to highlight PCM or ,,, . ...... _, . ......
DOLBY DIGITAL
5 Press EXIT to return to normal viewing
* Manufactured under license from Dolby Laboratories Dolby and the
double-D symbol are trademarks of Dolby Laboratories
Checking the digital signal strength
You can check the strength of the digital signal by viewing the digital
signal meter
To view the digital signal meter:
1 Press TV to select the TV mode
2 Press MENU, then press 4 or
SleNAL r_ETE_
to display the SETUP menu. o...... _ ....... , .....
3 Press • or • to highlight SIGNAL ,_m.__ _o
METER
4 Press ",4or _. to check the digital-
signal strength
5 Press EXIT to return to the normal
screen
Display
TV
Menu/Enter
AV4_
Exit
Notes:
• Signal meter feature is not available for
analog channels.
• After approximately 240 seconds, SIGNAL
METER screen will return to normal TV-
operation automatically.
• When you select a vacant channel, the
signal meter may react.
÷
Displaying TV status information on-screen
Press
Analog channel:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if set)
• Stereo or SAP (second audio
program) audio status
• Content rating
• On timer, Sleep timer (if set)
• Picture size, Picture format
Digital channel:
• Clock
• Channel number, station name,
program name
• Remaining time • Audio language
• Content rating • HD or SD mark
• Closed Caption mark • V-Chip mark
DISPLAY to display the following information on-screen:
STEREO
SAP
TV-PG L V
ON TIMER 2:00A NI
SLEEP TIMER 2bOOm
ANT
ASCO
NATURAL CABLE
4801
CLOCK 12:00AM SUN 7
44
Note:
Analog channel status will display on the
screen for approx. 4 seconds. Digital channel
status will display for approx. 10 seconds.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
3X70121A En p42-45 44 _ 1/31/06,11:00PM