Connecting A Pc (Personal Computer); Power Source; Power Connection - Toshiba 42HP66 Owner's Manual

÷
÷
Connecting a PC (Personal Computer)
This connection allows you to view the image of a personal computer
(PC) on the TV screen.
Before you connect this TV to your PC, change the adjustment of your
PC's Resolution and Refresh rate. See "Monitor Display modes" at
right.
When connecting a PC to the TV, use an analog VGA (15 pin)
computer cable and a PC audio cable.
Set the video input source to PC mode (see "Selecting the video input
source" on page 31 and "Picture/Audio adjustments in the PC mode"
on page 45.) The TV can be used as a computer monitor.
TV back panel
Computer
Conversion adapter (if necessary)
Power source
Power connection
To use AC power
1. Connect the AC cord into the TV's AC inlet.
2. Connect the AC cord into a wall outlet.
1©
To AC inlet_
AC cord (supplied) y __ __
2
.................. _ 2
AC 120V, 60Hz
17
You will need:
• one VGA (15-pin) computer cable
• one PC audio cable
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
WVGA 848x480 60Hz
SVGA 800x600 60Hz
XGA 1024x768 60Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
WXGA 1360x768 60Hz
Notes:
• Some PC models cannot be connected to this
TV
• An adapter is not needed for computers with a
DOS/V compatible mini D-sub 15-pin terminal.
• The current signal source does not display
when you return to TV mode.
• The on-screen displays will have a different
appearance in PC mode than in TV mode.
• When you select WVGA or WXGA mode, set
the WVGA INPUT or WXGA INPUT to ON in
the PC PICTURE menu (see page 45.)
• The HDMI jack is not intended for connection
to and should net be used with a personal
computer.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON PLASMA DISPLAY
Avoid displaying stationary images on your
Plasma display for extended periods of
time. Fixed (non-moving) patterns or
images (including but not limited to PIP/
POP windows, closed captions, video
game patterns, TV station Iogos, stock
tickers, websites, and special formats that
do not use the entire screen) can become
permanently ingrained in the Plasma
display and cause subtle but permanent
ghost images. This type of damage is
NOT COVERED BY YOU R WARRANTY.
Note:
Make sure to insert the plug of each cord
securely,
WARNING:
• Do not connect this unit to power using any
other power cord. This could cause fire, electric
shock, or damage.
• Do not use with a voltage other than the power
voltage displayed. This could cause fire, electric
shock, or damage.
CAUTION:
• When this unit is not used for a long time, (e.g.,
away on a trip) in the interest of safety, be sure
to unplug it from the waft outlet.
• Do not plug/unplug the plug when your hands
are wet. This may cause electric shock.
• If you need to replace the suppliedAC cord,
contact your Toshiba authorized dealer.
g N
÷
3X70121A En p10-17 17 _ 1/31/06,10:58 PM