Connecting A Dtv Receiver/Set-Top Box With Colorstream ®(Component Video) And A Vcr - Toshiba 42HP66 Owner's Manual

÷
÷
Connecting a DTV receiver/set-top
box with ColorStream ® (component
video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream _ (component video) inputs. Connecting your
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From Antenna
tereo VCR
From DTV
Antenna
TV back panel
You will need:
• three coaxial cables
• two sets of standard AN cables
• one set of standard audio cables
• one set of component video cables
Note:
You can connect the component video cables
to either set of ColorStream jacks on the TV
(HD- 1 or HD-2.)
For HDMI connection, see page 14.
The ColorStream HD-1 and HD-2 jacks and
HDMI-1 and HDMI-2 jacks can be used with
Progressive (480p, 720p) and Interlaced
(480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO-1 (or VIDEO-2) at the same time or
the picture performance will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
÷
12
3X70121A En p10=17 12 _ 1/31/06,10:58 PM