Using The I.link Control Panel - Sony KD-34XBR2 Operating Instructions Manual

Using the D TV Menus
_l_ Youcan atso usethe
VideoInput optionto assign
video inputsto LLINKdevices.
Whenyou selectthat video
input, an LLINKconnection is
established. O nlyLLINK
devicesthat areset to Show
(see"LLINKSetup")and
which supportvideo input
connectionarelisted,
m
Fordetailsabout using
the i.LINKControlPanel,see
page44,
_J_ Fordetailsabout power
consumptionin standby
modes,see"Specifications"
on page72,
Option Description
Video Input
Allows you to select labels to help you recognize devices
connected to the audio/video jacks on the DTV. For
example, if you have a DVD player connected to the
VIDEO 2 jack, you can select the label DVDfor the VIDEO 2
input.
To select a label for a video input:
1 Move the joystick tt or It to highlight the video input
(VIDEO 1-6) that you want to assign a label. Then
press O to select the input.
2 Move the joystick tt or It to highlight one of the
displayed labels. Then press O to select it.
If you select the label Skip, your DTV skips this connection
when you press the W/VIDEObutton, i.LINK devices
cannot be assigned to VIDEO 5 or 6.
Language Select to display all on-screen menus in your language of
choice (English, Espanol, Francais).
i.LINKSetup
Select to display a list of i.LINK devices that are connected
to the DTV. To change the status of an i.LINK device:
1 Move the joystick tt or It to highlight an i.LINK
device. Then press @ to select the device.
2 Move the joystick It or It to highlight one of the
following options. Then press @ to select it.
Show Select to display this device in the i.LINK
Control Panel.
Hide Select to not display this device in the
i.LINK Control Panel. This is for devices that
are connected to, but not communicating
with, the DTV (or for devices that you don't
want to appear in the i.LINK Control Panel).
Delete Select for i.LINK devices that you have
disconnected from the DTV. To reconnect the
device, see page 29.
i.LINKStandby
On Allows the i.LINK signal to pass through to
connected i.LINK devices even when the
DTV is turned off. Front panel LED is
orange. The DTV uses more standby power
than when this option set to Off.
Off Does not allow the i.LINK signal to pass
through to connected i.LINK devices when
the DTV is turned off. Front panel LED is
red. The DTV uses less standby power than
when this option is set to On.
61