Sony KD-34XBR2 Operating Instructions Manual page 52

Using the DTV Features
5
6
Move the joystick tt and 4 to set the day(s), time (hour, minute,
AM/PM), duration, and channel number. Press O or ,_ to
confirm each setting and move to the next setting. Press _, to go
back to the previous setting.
After you've set the channel number, press O to save the Timer
settings. The settings are displayed in the Timer screen and the
Timer is set to On.
The DTV is now set to turn on, tune to the channel you've set, and
then turn off at the times you set for that Timen The Timer indicator
on the front panel indicates the Timer is set.
To turn a Timer setting on or off
Cl Select On or Offinstep 3 (page 45).
To change a Timer setting
Cl Set the timer (Timer1 or Timer 2) again. The old timer setting is
overwritten.
To set a second Timer setting
Set the other unset timer (Timer 1 or Timer2).
Setting the Clock
[_You canalsoaccess the
Timer t hrough theSetup menu,
For d etaiIs, s eepage 60.
If you didn't set the clock during the DTV's initial setup (see page 31),
you need to set it before you can set either of the Timers.
1
Press
TIMER.
2
3
4
The Timer Setup screen appears (as shown on pag e45).
Move the joystick tt or 4 to highlight Set the Clock then press @.
Move the joystick tt and 4 to set the current day and time (hour,
minute, and AM/PM). Press _ or move the joystick * to confirm
each setting and move to the next setting. Move the joystick _, to
go back to the previous setting.
When you finish setting the day and time, press _ to save the
clock settings.
46