Hitachi XP P9500 User Manual page 472

Message ID
KAPL01053-I
KAPL01054-W During the offline operation
KAPL01055-I
8-12
Message Text
If you are sure that there would
be no problem when the path is
placed in the Offline(C) status,
enter y. Otherwise, enter n. [y/
n]:
processing of the HDLM
command, a path that cannot be
placed in the Offline(C) status
was detected. PathID = aa...aa
Would you like to continue the
processing of the offline
operation? [y/n]:
All the paths which pass the
specified aa...aa will be changed
to the Offline(C) status. Is this
OK? [y/n]:
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
If you want to execute the
offline processing, enter y. If
you want to terminate processing,
enter n. For details on the
offline operation, see
(Places Paths Offline) on page
6-5.
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute offline
processing, enter y. If you want to
terminate processing, enter n. For
details on the offline operation,
see offline (Places Paths Offline)
on page 6-5.
Details
A path that cannot be set to
Offline(C) was detected during
multi-path offline processing. To
ignore this path and perform
offline processing for the next
path, enter y. To cancel offline
processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue processing
the offline operation of the
HDLM command for other paths,
enter y. If you want to terminate
processing, enter n. For details on
the offline operation, see
(Places Paths Offline) on page
6-5.
Details
Multiple paths will be collectively
set to Offline(C) because the -hba
or -cha parameter was specified.
To collectively set multiple paths
to Offline(C), enter y. To cancel
the operation, enter n.
aa...aa: CHA port or HBA
Action
If you want to execute offline
processing for the paths that meet
the specified requirements, enter
offline
offline