Sending A Fax After Talking On The Phone (Manual Transmission) - Sharp AR-FX7 Operation Manual

CONVENIENT METHODS OF USE
SENDING A FAX AFTER TALKING ON THE PHONE
(MANUAL TRANSMISSION)
If the other fax machine is set to manual reception, you can talk to the other party and then send a fax without
breaking the connection. This procedure is called manual transmission.
Automatic redialing ("If the receiving party is busy" (p.15)) will not take place if the line is busy.
Note
1
Make sure that the machine is in fax
mode.
SCAN
DATA
LINE
FAX
DATA
JOB STATUS CUSTOM SE
2
Place the original. (p.10)
If you have loaded the original on the
Note
document glass, you can only send one
page by manual transmission.
3
Select the original size, resolution,
exposure, and other settings as
needed.
• Manually setting the original size (p.20)
• Selecting the resolution (p.21)
• Selecting the exposure (p.22)
4
Lift the extension phone.
Or, you can press the [SPEAKER] key.
("ON-HOOK DIALLING" (p.11))
62
When the [FAX] key light
is on, the machine is in
fax mode. If the light is
not on, press the [FAX]
key.
5
Dial the number of the other party or
touch a rapid key.
CORPO. TPS
HARP CORPORATION SHARP GROUP
ACC.#-C
6
Speak to the other party when they
answer.
If you used the [SPEAKER] key to dial, lift the
extension phone to talk.
7
After the other party switches to fax
reception, press your [START] key
( ).
8
Replace the extension phone.
You can also dial using
the keypad on the
SPE
extension phone.
You cannot use a group
key or a rapid key that
includes a sub-address
and passcode.
Transmission begins.