Adjustments; Engine Preparation - Craftsman 247.298770 Owner's Manual

FIGURE 13.
2, Change oil after first 2 hours of operation and
every 25 hours thereafter_ Check oil every 8
operating hours.
Place throttle control lever up through the handle
panel and secure with two self tapping screws (L),
using a 1/4" fiat screwdriver.. See figure 14_
FIGURE 15.
3- Fill fuel tank with clean fresh regular grade of
gasoline. See figure 16..
FIGURE 14.
Engine is shipped without oil,
ENGINE
PREPARATION
1o Before starting, Fill crankcase with 2_A pints
of SAE 30 heavy duty detergent oil, Be sure
that engine is level, See figure 15,
FIGURE 16.
ADJUSTMENTS
After all assembly is completed, this
final adjustment must be made prior
to initial operation.
Gear Shift Rod Final Adjustment
1. Place ktick pins in freewheeling position. See
figure 17,