HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 69

Status Code Value
16
Invalid Target Id
17
Invalid Time
18
Media is Inaccessible
19
No Fibre Channel Port
20
No Image
21
No Permission
22
Storage system not initialized
23
Not a Loop Port
24
Not a Participating Controller
Meaning
The supplied target identifier is invalid.
This can indicate a user or program er-
ror.
The time value specified is invalid. This
can indicate a user or program error.
The operation could not be completed
because one or more of the disk media
was inaccessible.
The Fibre Channel port specified is not
valid. This can indicate a user or pro-
gram error.
There is no firmware image stored for
the specified image number.
The disk device is not in a state to allow
the specified operation.
The operation requires a storage cell to
exist.
The Fibre Channel port specified is either
not a loop port or is invalid. This can in-
dicate a user or program error.
The controller must be participating in
the storage cell to perform the operation.
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
How to Correct
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
The disk device must be in either
maintenance mode or in a re-
served state for the specified oper-
ation to proceed.
Create a storage cell and retry the
operation.
Report the error to product support.
Verify that the controller is a parti-
cipating member of the storage
cell.
69