NOTE:
The dual PDU assembly shown in
the AC receptacles and mounting hardware.
Figure 17 Dual PDU assembly
.
1. PDU 1
3. Circuit breakers
5. Mounting hardware
PDU 1
PDU 1 connects to AC power distribution source 1. A PDU 1 failure:
•
Disables the power distribution circuit.
•
Removes power from PDMs 1, 2, and 3.
•
Disables PS 1 in the drive enclosures.
•
Disables the upper controller power supply.
PDU 2
PDU 2 connects to AC power distribution source 2. A PDU 2 failure:
•
Disables the power distribution circuit.
•
Removes power from PDMs 4, 5, and 6.
•
Disables PS 2 in the drive enclosures.
•
Disables the lower controller power supply.
PDMs
There are six PDMs mounted in the rear of each rack:
•
Three mounted on the left vertical rail connect to PDU 1.
Figure 17
typically lays flat in a rack, but is shown raised to illustrate
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
2. PDU 2
4. AC receptacles
31