Brother MFC-9130CW Network User's Manual page 71

Web Based Management

Auth. Method
Choose the authentication method required for access to the CIFS server Auto, Kerberos
2
NTLMv2 .
1
Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a
single sign-on.
2
NTLMv2 is the authentication method used by Windows to log into servers.
• Auto: If you choose Auto, the machine will initially search for a Kerberos server. If the Kerberos
server is not detected, NTLMv2 will be used for the authentication method.
• Kerberos: Choose Kerberos to use Kerberos Authentication only.
• NTLMv2: Choose NTLMv2 to use NTLMv2 Authentication only.
For Kerberos and NTLMv2 Authentication, you must also configure the Date&Time settings or
the SNTP protocol (network time server).
For configuring the Date&Time and the SNTP settings, see Synchronize with SNTP server
on page 62.
You can also configure the Date&Time settings from the machine's control panel. See Quick
Setup Guide.

Username
Enter the Username for the authentication (up to 96 characters).
NOTE
If the username is part of a domain, please input the username in one of the following styles: user@domain
or domain\user.

Password
Enter the password for the authentication (up to 32 characters).

Kerberos Server Address (if needed)
Enter the KDC Host Address (for example: mypc.example.com) (up to 64 characters) or the IP
address (for example: 192.168.56.189).

Error Detection Setting (See Error Detection Setting on page 66.)
d
In the Connection Status, you can confirm the last log status. For more information, see Understanding
Error Messages on page 67.
e
Click Submit to display the Test Print Log to Network page.
To test your settings, click Yes and go to step f.
To skip the test, click No. Your settings will be submitted automatically.
f
The machine will test your settings.
g
If your settings are accepted, Test OK appears on the page.
If Test Error appears, check all settings, and then click Submit to display the Test page again.
1
, or
5
65