Brother MFC-9130CW Network User's Manual page 118

Multi-protocol on-board ethernet multi-function print serever and wireless multi-function print server
Hide thumbs Also See for MFC-9130CW:
Table of Contents

Advertisement

Troubleshooting
I want to check my network devices are working properly.
Question
Is your Brother machine,
access point/router, or
network hub turned on?
Where can I find my Brother
machine's network settings,
such as IP address?
How can I check the link
status of my Brother
machine?
Can I "ping" the Brother
machine from my
computer?
Is the Brother machine
connecting to the wireless
network?
I have checked and tried all
of the above, however, I'm
still having problems. Is
there anything else I can
do?
Interface Solution
wired/
Make sure you have confirmed all instructions in First check the following:
wireless
on page 105.
wired/
Print the Network Configuration Report. (See Printing the Network
wireless
Configuration Report on page 48.)
wired/
Print the Network Configuration Report and check that Ethernet Link
wireless
Status or Wireless Link Status is Link OK. (See Printing the Network
Configuration Report on page 48.)
If the report shows Link DOWN or Failed To Associate, start over again
from the First check the following: on page 105.
wired/
Ping the Brother machine from your computer using the IP address or the
wireless
node name.
Successful i Your Brother machine is working correctly and connected
to the same network as your computer.
Unsuccessful i Your Brother machine is not connected to the same
network as your computer.
®
(Windows
)
Ask the network administrator and use the Network Connection Repair
Tool to fix the IP address and the subnet mask automatically. For the
detail of the Network Connection Repair Tool, see (Windows
the IP address and the Subnet Mask using the Network Connection
Repair Tool. in Is your Brother machine assigned with an available IP
address? on page 108.
wireless
Print the WLAN report to confirm the state of the wireless connection. For
how to print, see Printing the WLAN report (For DCP-9020CDW,
MFC-9130CW, MFC-9330CDW and MFC-9340CDW) on page 48. If there
is an error code on the printed WLAN report: see Quick Setup Guide:
Troubleshooting.
wireless
See the instructions supplied with your WLAN access point/router to find the
SSID and the Network Key information and set them correctly. For details of
the SSID and the Network Key, See Are your security settings
(SSID/Network Key) correct? in I cannot complete the wireless network
setup configuration. on page 106.
8
®
) Confirm
112

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents