Back inner cover and front inner cover
1
2
Figure 97.
Back inner cover and front inner cover
3
4
5
130 Removal and replacement
Remove the following bins:
• Face-up bin. See page 129.
• Stapler/stacker bin. See page 129.
Use a Torx #20 screwdriver to remove six screws from the back inner cover (callout 1).
2 1
Pull the back inner cover away from the back cover until it releases.
Remove the back inner cover.
Repeat steps 1 through 5 to for the front inner cover to remove it. The front inner cover is
installed across from the back inner cover.
ENWW