12 Hold the folding blade (callout 8) inside, so that the folding mechanism can clear the frame
Figure 83.
Folding mechanism (5 of 6)
Reinstall note
Figure 84.
Folding mechanism (6 of 6)
ENWW
(callout 9).
2 8
Install the timing belt (callout 10) underneath the tensor shaft (callout 11).
Make sure that the timing-belt teeth are on the inside of the belt.
Make sure that you reinstall the metal frame panel (see figure 80 on page 117) before you
reinstall the flipper assembly.
11
2
10
2
9
2
Chapter 6 Removal and replacement 119