Updating The Musiccast Client Firmware - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual

System settings

Updating the MusicCAST client firmware

At times Yamaha releases updates to the firmware
in either or both the MusicCAST client and server.
These updates are generally aimed at improving the
experience of using your MusicCAST equipment.
Follow the instructions provided with the update
carefully. Do not use the update procedure unless
specifically instructed to do so.
The procedure for updating the firmware is as
follows:
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– +
VOL
PHONES
1.
Place the update CD in the disc tray in
your MusicCAST server.
2.
Update the firmware on your
MusicCAST server if necessary (see
page 128 of the MCX-1000 owner's
manual).
3.
Press and hold MENU for two seconds
to return to the Top Menu screen.
MENU
4.
Use u / d to move the cursor to "Setup"
and press SELECT.
The Setup screen appears on the display.
SELECT
5.
Use u / d to move the cursor to
"System" and press SELECT.
The System screen appears on the display.
SELECT
104_Musiccast_E.p65
OFF TIMER SLEEP
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
MENU
STOP
7
PLAY
S
PLAY
MENU
INFO.
PLAY
GROUP GROUP
SELECT
BOOK
INPUT
MARK
RECALL MUTE
VOL
u / d
SELECT
64
6.
Use u / d to move the cursor to
"System Update" and press SELECT.
The System Update prompt appears on the
display.
SELECT
7.
Press PLAY to begin the update
process.
The following screens appear in order:
64
2003.06.04, 16:09