Using The Sleep Function; Switching The Unit To Sleep Mode; Turning The Musiccast Client On Again - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Owner's Manual

MusicCAST settings

Using the Sleep function

You can set your MusicCAST client in Sleep mode
when you are not using it. Power consumption is
greatly reduced in Sleep mode, but the MusicCAST
client still consumes a small amount of power to
keep the display and the remote control signal
receiver in operation.
You can place the unit in sleep mode by carrying
out the procedure below:
ON
TIMER
PUSH
SELECT
MENU
PLAY INFO.
– +
VOL
PHONES
I Switching the unit to sleep mode
1.
Press and hold MENU for two seconds
to return to the Top Menu screen.
MENU
2.
Use u / d to move the cursor to "Sleep"
and press SELECT.
The Sleep prompt appears on the display.
SELECT
104_Musiccast_E.p65
SLEEP OFF TIMER SLEEP
ON TIMER REPEAT RANDOM
I 2 3
PAUSE
4 5 6
STOP
7
PLAY
MENU
S
PLAY
MENU
INFO.
GROUP GROUP
SELECT
u / d
BOOK
INPUT
MARK
SELECT RECALL VOL MUTE
62
3.
Press SELECT.
The MusicCAST client switches to sleep mode,
and the current time appears on the display.
SELECT
You can also switch the unit to sleep mode by
pressing SLEEP on the remote control. The
time does not display correctly if the
MusicCAST client is not able to establish a
good connection with the MusicCAST server. If
the time displayed is not correct, alter the date
and time settings on the MusicCAST server to
display them correctly (See page 117 in the
MCX-1000 owner's manual for more
information on how to do this).
I Turning the MusicCAST client on again
Press SLEEP on the remote control or
SELECT on the MusicCAST client.
The MusicCAST client turns on.
Note
• The MusicCAST client automatically places itself
in sleep mode if you do not use it for 30 minutes.
62
2003.06.04, 16:09