HP D7171A - NetServer - LPr Upgrade Manual page 17

Chapter 2
Latches on
I/O Fans
Thumbscrew
on Air Baffle
Figure 2-5. Remove I/O Fans from Rack-Mounted HP NetServer
NOTE
To improve access to the back of the secondary hot-swap mass
storage cage, you can remove the air baffle indicated in
Figures 2-4 and 2-5. To remove it, loosen the thumbscrew, and
pull the air baffle away from the HP NetServer. Be sure to
reinstall the air baffle before reattaching Cover 1.
Installation
13