Appendix B Updating Hp Netraid Firmware - HP D7171A - NetServer - LPr Configuration Manual

APPENDIX B Updating HP NetRAID Firmware

After you created your NetRAID utilities diskettes (see Appendix A), use the flash utility diskette labeled NetRAID
Firmware & Driver to upgrade the adapter firmware on both systems.
To flash the NetRAID adapter firmware:
1. Shut down the system and boot to DOS,
2. Insert the flash utility diskette, NR Firmware & Driver, in the system's floppy drive.
3. At the A: prompt, run the firmware update program mflash.exe by typing:
The mflash utility begins updating the firmware and provides feedback in the form of three animated bars that gauge
the utility's progress.
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997
a:\mflash [Return]
34