Chapter 4
Hot-Swap Drive Bay Addresses
The hot-swap bays are addressed from left to right as 0 and 1. The system will
default to booting from the drive with SCSI ID 0 on the left bay.
Other SCSI Device Addresses
Other SCSI devices connected to LPr's embedded SCSI channel can never use
device ID 7 (the embedded SCSI controller). Other SCSI devices can use device
IDs 0 and 1 if those hot-swap bays are not in use.
Installing Mass Storage Devices
Figure 4-1. Hot-Swap Bays
SCSI ID 1
SCSI ID 0
25