Mounting The Lpr In A Rack - HP D5970A - NetServer - LCII Installation Manual

Chapter 1

Mounting the LPr in a Rack

NOTE You may want to configure and test the NetServer LPr before
mounting it in the rack, or you may first mount it in the rack.
Mount the Server in
the Rack
Install the
Front Bezel
6
Setting Up the HP NetServer LPr
Refer to the Installation Roadmap that comes
with the rack.
Use the template that comes with the mounting
hardware to determine rack nut and screw
location and order of attachment.
Refer to Chapter 9, "Mounting the NetServer in
the Rack," for a complete description of this
process.
Do this after you have installed hard drives into
the hot-swap bays.
Refer to the Chapter 3 section, "Removing and
Replacing the Front Bezel."