CAUTION:
consumption of the system (including I/O cards, processor, and memory) must not exceed the maximum
rating of the system power supply.
PCI card support bracket
Some PCI cards have retainers installed to prevent movement during shipping.
Removing a PCI card support bracket
To remove a PCI card support bracket:
1.
Disconnect power from the system (see
2.
Remove the side access panel (see
3.
For short or tall PCI cards:
a.
Press in on the ribbed portion of the holder (1).
b.
Apply upward pressure on the lower arm (2).
c.
Rotate the support bracket out of the chassis, as shown:
Figure 4-33
80
Chapter 4 Removal and replacement procedures
To prevent possible equipment damage when installing a PCI card, overall power
Removing a short PCI card support bracket
Predisassembly procedures on page
Side access panel on page
52).
58).
ENWW