Table 4-4
Workstation component disassembly order (continued)
Security lock padlock loop (optional)
If a security padlock is installed on your workstation, remove it before servicing the workstation.
Removing the security lock
To remove the padlock, unlock it and slide it out of the padlock loop, as shown in the following figure.
Figure 4-2
Cable lock (optional)
If a cable lock is installed on your workstation, remove it before servicing the workstation.
56
Chapter 4 Removal and replacement procedures
Hard drives
(SAS hard drive
on page
86),
on page
91)
Processor heatsink
on page
96)
Battery
(Battery
on page
101)
Removing the security lock
SATA hard drive
(Processor heatsink
Processor
(System
processor on page
98)
System board
(System
board on page
100)
ENWW