Yamaha Clavinova CLP-480 Owner's Manual page 74

FactorySet
Select whether the Songs in the MEMORY drive
Settings for "MemorySong":
MemorySongExcluded ...... Memory Songs are kept.
MemorySongIncluded ....... .Memory Songs are erased.
Alternate method for restoring the default
settings
Press and hold down the white key on the right end (C7)
and press the [ ] (Power) switch to turn on the power to
the Clavinova. In this case, the Memory Songs (Songs in
the MEMORY drive) are not erased.
Saving/Loading backup file for
internal data
From this display, you can save data on internal memory
to the connected USB storage device as a backup file
(named "clp-480.bup"). The backup file (clp-480.bup) can
be loaded to the instrument on this display. Before
executing this function, make sure to connect the USB
storage device.
FullBackup
Save
Select "Save" or "Load."
Use the C [–][+] buttons to select "Save" or "Load" then
press the B [+ (YES)] button to execute the Save or Load
operation.
Detailed Settings
74
Other settings — [FUNCTION]
Execute the Factory Set.
Execute? _ >
MemorySongExcluded
are erased or kept.
C7
Power switch
FullBackup
Execute the Full Backup.
Execute? _ >
NOTICE
• It may take 1 – 2 minutes to complete the backup. Do not turn off
the power during full backup. Doing so could result in damage
to the data.
• If the backup file (clp-480.bup) is already saved in the USB
storage device, the Save operation will overwrite or replace this
file with new one.
• Protected Songs (indicated by MS/Ms in the display) cannot be
backed up. Move such Songs to the USB storage device before
executing Full Backup by following the instructions page 45. If
you do not, the Protected Songs will be deleted when you load
the Backup file to this instrument.
• Do not execute "FullBackup" during other file operations. Doing
so could result in damage to the data.
NOTE
It is best to connect only a single USB storage device when
backing up your data. When several devices are connected, a
specific device cannot be identified for saving data.