D-Link DSN-5410-10 - xStack Storage Area Network Array Hard Drive Software Manual page 88

5.3.3 Viewing SMART Data and Attributes (SMART Data and SMART Attributes Tabs)
Self-Monitoring, Analysis, and Reporting Technology (SMART) is a monitoring system for SATA
drives to detect and report on various indicators of reliability, with the hope of anticipating
failures. SMART is not supported on SAS drives. With SMART, a SATA disk's integrated
controller works with various sensors to monitor various aspects of the drive's performance,
determines from this information if the drive is behaving normally or not, and makes
available status information to software that probes the drive and look at it.
The xStack Storage primary array collects the SMART information and displays it on the
following read-only tabs:
Smart Data. Shows SMART overview, self-test, and offline data collection information

for a SATA drive (see Figure 5-8).
Smart Attributes. Shows SMART attributes that are defined differently by each vendor

(see Figure 5-9).
78 Chapter 5 Managing Physical Storage
Figure 5-7. Extents Tab (Advanced View)
SMART is supported on SATA drives only, not on SAS drives.
The use of SATA drives is not recommended because they cannot be used in
High Availability configurations.