Settings (can be modified)
First Burst Length
Default Time To Wait
Maximum R2T Outstanding
Maximum Connections
Primary Header Digest Method
Secondary Header Digest Method
Primary Data Digest Method
66
Chapter 4 Managing Volumes
Figure 4-35. Advanced Volume Settings
Table 4-2. Advanced Volume Settings
Maximum amount, in bytes, of unsolicited data that an initiator can send to a
target during the execution of a single SCSI command. This amount includes the
immediate data, if any, and the sequence of unsolicited Data-Out PDUs, if any,
that follow the command. The allowable selections include 8192, 16384 and
32768. The default selection is 8192 bytes.
Maximum time to wait, in seconds, for a login PDU to be received from the target
in response to a login request sent by the initiator before failing the connection
attempt. The allowable range is 0 to 3600 seconds. The default is 2 seconds.
Maximum number of outstanding ready-to-send (R2T) requests that are allowed
for each task within this session. The allowable range is 1 to 8. The default is 8.
Maximum number of connections that will be allowed within this session. The
allowable range is 1 to 8. The default is 8.
Primary header digest used by the volume. Choices are:
No Digest (default)
CRC32C
Secondary header digest used by the volume. Choices are:
No Digest
CRC32C (default)
Primary data digest used by the volume. Choices are:
No Digest (default)
CRC32C
Description