Assembling the elite Panaboard
For Wall Mounting
1.
Attach the power cord.
•
Connect the power cord to the elite Panaboard
before installing on a wall.
2.
Depending on the location of the outlet, install
the power cord as illustrated in the following
diagrams.
•
When attaching the power cord downward.
•
When attaching the power cord along the lower
side of the elite Panaboard.
Power Cord
3.
Remove the push-turn rivets (4) on the
fasteners on the bottom of the board.
•
Turn the push-turn rivets counter-clockwise with
a Phillips-head screwdriver. When the fastener
pops up, the part can be removed.
Push-turn Rivets
4.
Hang the elite Panaboard on the wall mounting
plates with the screw heads.
Installation Manual
Operating Instructions
49
1