Menu - Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual

Item
FR SUPER
No. DISP.
0000
0001
890 DIF AUD OUT

MENU

This menu is used for menu settings.
Item
FR SUPER
No. DISP.
0000
0001
0002
0003
A00 LOAD
0000
0001
0002
0003
0004
A01 SAVE
0000
0001
0002
0003
A02 P.ON LOAD
0004
0000
0001
A03 MENU LOCK
A04 PF1 ASSIGN
A05 PF2 ASSIGN
A06 PF3 ASSIGN
A10 CARD READ
Setting
FR SUPER
No. DISP.
CH1+2
59.94Hz
CH3+4
Specifies the output channels when the audio signals are in 4-channel mode and output
in the DVCPRO (25 Mbps) format and a DV clip is played back.
0: CH1 and CH2
1: CH3 and CH4
Setting
FR SUPER
No. DISP.
USER2 Specifies user files loaded in USER 1.
0: Loads the contents of USER 2
USER3
1: Loads the contents of USER 3
USER4
2: Loads the contents of USER 4
USER5
3: Loads the contents of USER 5
NOTE:
Pressing the MENU button when loading completes opens a
confirmation screen. Press the SET button to store the setting. Press
the EXIT button to discard the change and retain the setting.
USER2
Specifies the user file that saves USER 1 settings.
0: Saved to USER 2
USER3
1: Saved to USER 3
USER4
2: Saved to USER 4
USER5
3: Saved to USER 5
LOCKED
4: Appears when all user files are write protected.
NOTE:
• A user file in change prohibit status cannot be selected.
• When all user files are in the change prohibit status, "LOCKED"
appears and data cannot be saved.
OFF
Specifies which user files will be loaded into USER 1 and whether or
not the USER 1 settings should be used in startup when the power is
USER2
turned on.
USER3
0: Operation is started with the settings of the previously set user file.
USER4
1: The content of USER 2 is loaded into USER 1.
USER5
2: The content of USER 3 is loaded into USER 1.
3: The content of USER 4 is loaded into USER 1.
4: The content of USER 5 is loaded into USER 1.
OFF Sets/releases the user file (USER2 - USER 5) lock mode.
0: Releases the lock. (File data can be changed.)
ON
1: Lock is engaged. (File data cannot be changed.)
NOTE:
• USER 1 cannot be locked.
• Files can be loaded from the SD memory card even if they are
locked. The status after load operation depends on the setting
defined by the loaded data.
Registers a setup menu item in the PF1 button.
Registers a setup menu item in the PF2 button.
Registers a setup menu item in the PF3 button.
Select files from the four SD memory card files to load into the menu.
This function is available only to USER 1-5 (SYSTEM) and USER 1-5.
Settings and brief function description
only
50Hz
* An underlined setting indicates an initial value.
Settings and brief function description Remarks
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER2 to
USER5 only
Setting available
for USER1 only
139
Setup: Item Settings