Panasonic AJHPM110E - MEMORY CARD PORTABLE RECORDER/PLAYER Operating Instructions Manual page 136

Item
FR SUPER
No. DISP.
708 CH3 OUT LV
709 CH4 OUT LV
725 REC CH1
726 REC CH2
727 REC CH3
728 REC CH4
731 PB FADE
732 EMBEDDED AUD
775 25M REC CH
136
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 4dB Specifies the standard level for audio output (CH3).
0001 0dB
0002 –3dB
0003 –20dB
0000 4dB Specifies the standard level for audio output (CH4).
0001 0dB
0002 –3dB
0003 –20dB
0000 CH1
Specifies the input signal to be recorded on the audio CH1.
0: Audio input CH1 signal
0001 CH2
1: Audio input CH2 signal
0002 CH3
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH2.
0001 CH2 0: Audio input CH1 signal
1: Audio input CH2 signal
0002 CH3
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH3.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
2: Audio input CH3 signal
0003 CH4
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 CH1 Specifies the input signal to be recorded on the audio CH4.
0001 CH2 0: Audio input CH1 signal
0002 CH3 1: Audio input CH2 signal
0003 CH4
2: Audio input CH3 signal
3: Audio input CH4 signal
0004 CH1+2
4: Mixed audio input CH1 and CH2 signal
0005 CH3+4
5: Mixed audio input CH3 and CH4 signal
0000 AUTO Specifies audio processing to be performed between clips and edit points created using
play list or edit copy.
0001 CUT
0: Depends on recording status.
149).)
1: Forcible cut.
NOTE:
The IEEE1394 connector output is forcibly cut also in the AUTO setting.
0000 OFF Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
0001 ON output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
0000 2CH
59.94Hz
0001 4CH
Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV
(25 Mbps) recording.
0: Does not supply microphone current.
1: Records on four channels.
NOTE:
DVCPRO HD, AVC-Intra50 (option) and AVC-Intra100 (option) always record on 8
channels, and DVCPRO50 always records on 4 channels.
Settings and brief function description
(Refer to the section "Audio V Fade Function" (page
only
50Hz