HP SignagePlayer mp8000r Maintenance And Service Manual page 122

Maintenance & service guide: hp signageplayer mp8000r and mp8000s
Hide thumbs Also See for SignagePlayer mp8000r:
Table of Contents

Advertisement

9.
Position the hard drive so that the top of the hard drive is up against the top of the carrier (1) so
that the circuit board on the bottom of the hard drive does not come in contact wit the tabs on the
bottom of the carrier, then slide the new hard drive into the carrier (2).
CAUTION:
tabs on the bottom of the carrier when sliding the hard drive into the carrier. Doing so can cause
irreparable damage to the hard drive.
Figure 7-23
10.
Set the hard drive down into the bottom of the carrier (1), then replace the four guide screws on
the sides of the carrier to secure the drive in the carrier (2).
Figure 7-24
112
Chapter 7 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
Do not allow the circuit board on the bottom of the hard drive to scrape along the
Sliding the Hard Drive into the Carrier
Lowering the Hard Drive and Replacing the Guide Screws

Advertisement

Table of Contents
loading

This manual is also suitable for:

Signageplayer mp8000s

Table of Contents