B Specifications; Vls Node; Ethernet Switch 2510-24 Specifications - HP 12000 User Manual

B Specifications

This section provides the VLS node and Ethernet switch specifications.

VLS Node

Specification
Height
Depth
Width
Weight (maximum: two processors, two power
supplies, eight hard drives)
Weight (minimum: one processor, one power
supply, no hard drives)
Weight (no drives installed)
Ethernet Switch 2510–24 Specifications
Item
Dimensions
Weight
Ports
Processor
Flash capacity
RAM/ROM capacity
Packet buffer size
Latency (100 Mb)
Latency (1000 Mb)
Throughput
Switching capacity
MAC address table size
Maximum heat dissipation
Voltage
Current
Power
Frequency
178 Specifications
Value
4.32 cm (1.70 in)
69.53 cm (27.38 in)
42.62 cm (16.78 in)
15.97 kg (35.20 lb)
14.51 kg (32.00 lb)
14.06 kg (31.00 lb)
Specification
9.3 x 17.42 x 1.73 in. (23.62 x 44.25 x 4.39 cm) 1U height
4.9 lb (2.2 kg) fully loaded
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX); 1 RJ—45 serial console port; 2 dual-personality ports,
each of which can be used as either an RJ-45 10/100/1000 port or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
MIPS, 264 MHz
8 MB
64 MB
384 KB
< 4.9 µs (64-byte packets)
< 2.6 µs (64-byte packets)
6.5 million pps (64-byte packets)
8.8 Gbps
8000 entries
68 BTU/hr
100- 1 27 VAC/200-240 VAC
0.75 A /0.4 A
20 W
50/60 Hz