Canon VB101 User Manual page 83

Retrieving values from Admin Viewer and changing settings
Start up Admin Viewer and set the camera angle as a preset.
To Make Settings...
1
2
3
From the Preset Selection box, select the preset to
be set, and enter the Preset Name. Click the Admin
Viewer button to start it up.
Use Admin Viewer to move the camera angle to the
position you want to set preset camera angle, then
click the Get Value button. The preset camera
position set can be checked in the Preset Values
Entry box, or with the Preset Preview frame.
Click the Send button. Check the Status List to be
sure the values were sent correctly. Then when the
Reflect set values button is clicked, the values will
be reflected in the VB101.
Preset Setting Tool
4
83