Canon VB101 User Manual page 75

Camera Selection Box
6
The camera to be used to apply view restriction settings is selected or changed from
among the cameras connected to the VB101.
Apply the View Restriction
7
View restriction settings are applied when this item is selected.
View Restriction Values Entry box and Get Value button
8
The current view restriction settings are displayed in the View Restriction Values Entry
box, and new values can be entered to change the settings. When the Get Value button is
clicked, current angle of the selected camera can be retrieved and reflected in the setting
values.
GView restriction setting values
Upper value ... Value for the upper limit of the view restriction. The upper value of the
selected camera angle is obtained using the Get Value button.
Lower value ... Value for the lower limit of the view restriction. The lower value of the
selected camera angle is obtained using the Get Value button.
Left value ....... Value for the left limit of the view restriction. The left value of the selected
camera angle is obtained using the Get Value button.
Right value .... Value for the right limit of the view restriction. The right value of the
selected camera angle is obtained using the Get Value button.
Telephoto ...... Value for the telephoto limit of the view restriction. The zoom value of the
selected camera angle is obtained using the Get Value button.
Wide-angle .... Value for the wide-angle limit of the view restriction. The zoom value of
the selected camera angle is obtained using the Get Value button.
Admin Viewer button
9
This button can be used to start up Admin Viewer.
Preview button
10
Clicking this button allows checking of the set values specified in the View Restriction
Values Entry box with the View Restriction Preview frame.
Status List
11
Displays the results of communication between this tool and the VB101.
c
Edited content will not be reflected in the viewer accessed to the VB101 at the
stage when the Send button is used to send edited content to the VB101.
Note
After confirming the edited content, be sure to use the Reflect set values
button to reflect the settings in the VB101.
View Restriction Tool
4
75