Preparation And Precaution - Canon VB-C300 Administrator's Manual

Preparation and Precaution

Use NTFS-formatted hard disk
The hard disk where the software will be installed and video data will be stored should be formatted in the
NTFS.
You can convert the current hard disk into the NTFS format using the following command at the command
prompt.
convert <Name of the drive>:/fs:ntfs
Example: To convert Drive C into the NTFS format:
convert c:/fs:ntfs
Tip
Select [All Programs], [Accessories], and [Command Prompt] from the [Start] menu to display the
command prompt. If you press the [Enter] key following the command shown above, a series of questions
appears, then conversion starts. Reboot the PC after the process completes conversion. Any data on the
hard disk is not lost by conversion.
Stop other applications
You should stop other applications including anti-virus program before starting installation.
Installation Procedures
2-7