Canon VB-C300 Administrator's Manual page 257

Viewer Warning Messages
The audio transmission function of the
camera is not available.
Please confirm the camera settings.
A setup of the stream for recording is
applied only to the JPEG recording not
more than maximum frame rate 10fps.
Add
It is applied to neither JPEG recording of 10
Recording
or more fps nor MPEG-4 recording.
Schedule
MPEG-4 recording with Preset Tour could
consume disk space rapidly.
Do you wish to continue?
Attention:
The current Preset Tour settings might
require you to repair the Pan/Tilt machine
soon.
Please note that the repair of consumable
mechanical parts such as the Pan/Tilt
machine may not be covered by the
guarantee.
Recommended Preset Tour settings to
Preset Tour reduce the machine load:
Change the Preset Tour duration within
Settings
<hh> : <nn> at the [Start Time] and [End
Time] setting.
Adjust the Preset Tour configuration so
that the total amount of camera
movement (angle/time) becomes small.
Set the pause time to the preset position
longer than the Pause (sec) setting.
Click the [Cancel] button to return to the
setting screen.
Messages Cause
The audio transmission function of the
camera is disabled.
You attempted to apply video recording
stream settings to high rate JPEG video or
MPEG-4 video.
The data volume of MPEG-4 video
becomes several times bigger if the video
contains a lot of motion of subjects. You
need attention when using Preset Tour
together with MPEG-4 recording, as a
whole image moves during Preset Tour.
The configured settings exceed the
endurance limit of 100,000 pans and tilts
(300,000 for the VB-C60) within one year on
the VB-C50i or VB-C300.
Messages List
9-15