Canon VB-C300 Administrator's Manual page 258

Messages List
Viewer Error Messages
The < > part of the message differs depending on the situation.
Failed to connect to Master Storage Server.
Please check the details and try again.
Failed to connect to Master Storage Server
'<IP address of Storage Server>' because
Starting the
of version mismatch.
Viewer
Recording settings for camera servers on
the storage server ('<Storage Server
Name>') will not be available. Version
mismatch.
Recording settings for camera servers on
the storage server ('<Storage Server
Name>') will not be available.
<Cause of the error>
The changes you are trying to save cannot
be sent to the storage server ('<Storage
Server Name>') and will be lost.
Configuration
and
Preferences
The configuration on the Master Storage
screen
Server has been modified by another
administrator. Please restart your Viewer.
Changes you have made to thumbnails,
locations, zones and camera names have
not been saved.
The configuration on the Master Storage
Server has been modified by another
administrator. Please restart your Viewer.
9-16
Messages Cause
An attempt was made to start the Viewer,
however a connection to the specified
Master Storage Server could not be
established.
You attempted to connect to an older
version (v1.1 or earlier) of the Storage
Server as the Master Storage Server.
Alternately, you attempted to connect to a
v2.2 Master Storage Server from an older
version (v1.2, v1.3, v1.4, v2.0 or v2.1)
Viewer.
You attempted to connect to an older
version (v1.1 or earlier) of the Storage
Server as a Slave Storage Server.
Alternately, you attempted to connect an
older version (v1.2, v1.3, v1.4, v2.0 or v2.1)
Viewer to a v2.2 Slave Storage Server.
A connection to a Storage Server other
than the Master Storage Server failed when
you accessed the [Configuration and
Preferences] screen.
An attempt was made to save the changes
in the Camera Server list in the
[Configuration and Preferences] screen,
however a connection to the Storage
Server could not be established.
An attempt was made to save the changes
in the Camera Server list, however another
administrator has conducted changes.
Another administrator changed the Master
Storage Server settings while the Camera
Server list was displayed.