Advertisement
Security Systems
From
Our Reference
ST-VS/PRM4
Andreas Baumann
DiBos 8.5 release notes
•
Timeout for failing dial-connections (ISDN)
After 5 unsuccessful attempts the dial-in will be stopped.
•
The icon "Sequence" is displayed in yellow color as long as a sequence is
running.
•
DiBos 8.5 offers 4 new transmission rates for the bandwidth throttling feature:
1,25 / 1,5 / 1,75 / 2,5 Mbit/s. In this way it is easier to find an appropriate
transmission rate on T1 WAN networks.
2 Fixed bugs and fixed customer complaints
2.1
Improved algorithm for computer signature
DiBos 8.5 uses an improved algorithm for determining the computer signature making
software licensing more stable. This helps especially with DiBos 8 Software Receiver
and IP Recorder installed on any customer PC.
2.2
NTSC/PAL settings when adding an IP camera
NTSC settings do not change anymore to "PAL" when a new IP camera is added to
the DiBos Configuration.
2.3
Motion detection cells (NTSC)
Motion detection cells are now also visible for BVIP devices that are configured with
2CIF or 4CIF (NTSC). Smart motion search is also fixed.
2.4
Memory leak on JobServer
The Web-Client does not cause any memory leaks on the JobServer anymore.
2.5
4 audio channels on VIP X1600 module
DiBos8 is now able to record all 4 audio channels of a VIPX1600 module.
2.6
VCS Active X Control 4.24
VCS ActiveX Control 4.24 can now be installed on DiBos 8 (DirectX 9.0c not found)
2.7
No unexpected error message from ATM via DTP3 box
2.8
DiBos 7.51 Export
In older versions a remote 7.51 export sometimes stops with an error message when
exporting from DiBos 8.x. This bug is fixed with DiBos 8.5.
2.9
Non active email server settings
In older versions the email server settings were only updated if the configuration was
closed. This is now fixed. The email server settings are on the Alarm processing
page.
Tel
Fax
1315
281315
Ottobrunn
23 September 2008
Page 5 of 7
Advertisement
