Advertisement
Security Systems
From
Our Reference
ST-VS/PRM4
Andreas Baumann
DiBos 8.5 release notes
1 New software features in DiBos 8.5
1.1
Automatic alarm recording on DiBos receiver
It is now possible to record the transmitted alarm video on a DiBos receiver
automatically. The video is stored in the native DiBos format into a custom directory.
Automatic warning and error events can be triggered when this directory reaches a
certain limit or runs full.
It is also possible to record the transmitted alarm video manually after the operator
presses the new record button that is displayed on top of the alarm cameras list. The
automatic alarm recording is only working with alarms transmitted by DiBos 8 stations.
1.2
Turn off automatic deletion of protected data
It is now possible to decide whether the protected data should be automatically
deleted or not. In all DiBos Versions < 8.5 protected data was always deleted after the
specified time frame for automatic deletion. If this behavior is now turned off protected
data can only be deleted manually.
1.3
Schedule dependent reference image check
It is now possible to activate the reference image check for each time period. The
system default is that all time periods are selected.
1.4
Microsoft Windows Vista support
The DiBos Receiver Software (DB-SR-002) and the DiBos IP Recorder Software (e.g.
DB-SR-162) are now compatible to Microsoft Windows Vista.
Tel
Fax
1315
281315
Ottobrunn
23 September 2008
Page 2 of 7
Advertisement
