Multi-Cd; How To Listen To A Cd - Pioneer AVIC S1 - Automotive GPS Receiver Operation Manual

MULTI-CD

You can use Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD
operation is explained starting on page 125.
➲
This cannot be used unless AV Head Unit is combined and the source unit is connected by
IP-BUS.
1 2
DISC
1
Shows the disc currently playing.
TRACK
2
Shows the track currently playing.
TIME
3
Shows the elapsed playing time of the current track.
DISC TITLE
4
The DISC TITLE is displayed. With regular CDs that do not usually have the titles
recorded on them, "NO TITLE" is displayed.
TRACK TITLE, DISC ARTIST, TRACK ARTIST
5
When playing CD TEXT disc, each of TRACK TITLE, DISC ARTIST or TRACK ART-
IST is displayed. Press DISP button repeatedly to swich those items.

■How to listen to a CD

1 Press SOURCE button to select MCD source.
2 Use VOL dial to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the 5 or ∞.
4 To perform fast forward or reverse, press and hold 2 or 3.
5 To skip back or forward to another track, press 2 or 3.
Pressing 3 skips to the start of the next track.
Pressing 2 2 2 2 once skips to the start of the current track. Pressing again will skip to the pre-
vious track.
➲
If there are no discs in the multi-CD player magazine, "NO DISC" is displayed. Depending
on the multi-CD player you use with Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400),
the display may be blank.
124
3 4 5
N/A
NAVI/AV
button