Playing Audio Data
G Preparation
Transfer audio data to the gigabeat beforehand. See the TOSHIBA Audio Application
G
Owner's Manual for the procedure for transferring audio data.
Connect the wired remote controller to the headphone jack on the gigabeat.
G
Connect the supplied headphones to the wired remote controller.
G
Turn the power ON. (
G
Turn the power to the gigabeat OFF before connecting or disconnecting the
wired remote controller.
Insert the plug of the wired remote controller firmly to the end. Incomplete
insertion may disable the remote controller operation, although sound may
be heard.
When connecting any equipment other than headphones, do so via the
supplied wired remote controller. Connecting other equipment directly to the
headphone jack may cause a malfunction.
p. 26)
27