Tabletop Stand: PDK-TS01
[503CMX/503MXE : 433CMX/433MXE]
2) Instructions for using the main display packing material as a stand for the working on the display
Main plasma display packaging setup
Outer box
Inner box frame
Pad
Mirror mat
Pad
Plasma display
1 Construct the stand for the plasma display using the inner box frame and pads shown in the figure above.
Pads
Inner box frame
2 Set the plasma display down on the pads as shown in the figure below.
Plasma display
Mirror mat
Inner box frame topped by two pads
3 Follow the instructions in Steps 1-4 in "Normal Installation" to attach the stand to the plasma display.
78