System Connections - Kenwood SS-992 Instruction Manual

System connections
Make connections as shown below. When connecting the related system components, refer also to the instruction
manuals of the related components.
Do not plug in the power lead until all connections are completed.
™@ Connection with KA-892, KA-893, KC-992 or KC-993
KA-892 or
KC-992+Power Amplifier] —
Front speaker a or Front speaker
oo =) KA-893 or . OC eel t21D | [BB Severamaie
Co wee cooooeoo oo OC
Santee Center speaker
wT E-<) Car e)
1e-O Gan |
Gur one eS ey Australia Other countries
Rear speaker A)
AC outlet
U.S.A and Canada
Rear speaker
(L)
[a]
Nill
rd ed a]
msl
roe
if
System control terminal AC voltage selector switch To amplifier AC outlet
(Except for some areas)
System control connection
@ Be sure to insert the system control cord plugs fully into the
SYSTEM CONTROL terminals.
@ if the system control cord and audio cords are not connected
properly, the automatic system governing remote contro! and
system functions will not operate.
Preparations for operation A:
When this unit is connected to the TAPE 2/ADAPTOR jacks of the amplifier KA-892, KA-893, KC-992
or KC-993
@ Set the switch on the amplifier rear @ Turn the powers of @ Press the TAPE 2/ADAPTOR key on the amplifier
panelto ADAPTOR. (The switch posi- the components to front panel so that ;|ADAPTOR | lights up.
tion should be changed while the ON.
power is OFF.) TAPE 2/
ADAPTOR
—>
TAPE 2 | ADAPTOR
@ The VOLUME CONTROL of the amplifier is set automatically to the center position in about 20 seconds, The keys are invalid in this period.
@ The overall volume is to be adjusted with the VOLUME CONTROL of this unit or with the remote control provided with the amplifier.
e When this unit is not to be used, press the TAPE 2/ADAPTOR key on the amplifier front panel so that (ADAPTOR |goes out.
Notes:
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When piugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection
cords without removai of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
5 ss ~ 992 (En)