Cleaning And Maintenance; Rinsing The Machine - Philips baristina BAR300 Manual

English
14
Resetting the drink volumes to factory settings

Cleaning and maintenance

Rinsing the machine

8 The machine is ready when the led stops blinking. Remove the cup and enjoy
your coffee with the adjusted volume.
9 When all leds are off, the portafilter can be removed. Remove the portafilter
from the machine to empty it. Invert the portafilter over a bin and press the
ejection button to remove the coffee puck from the portafilter.
To reset the drink volumes to their factory settings:
1 Press and hold the Espresso, Lungo and Intensity boost buttons
simultaneously for 5 seconds until all buttons start to flash fast to show that
the machine has been reset to factory settings.
Before first use, make sure to rinse the machine. Also rinse the machine when it
has not been used for one week or longer.
To rinse the machine, the portafilter needs to be empty and inserted into the
machine. To start rinsing, press and hold the Intensity boost button for 3 seconds
until the Intensity boost button starts blinking intermittently.
1 Insert the portafilter into the machine until it clicks into place.
2 Remove the water tank from the machine.