Protecting The Environment; Installer Checklist To Be Completed By Installer; Upon Installation - Bosch 830 ES Installation And Operating Instructions Manual

Hide thumbs Also See for 830 ES:
Table of Contents

Advertisement

Protecting the environment

14
Protecting the environment
Packing
The packing box may be fully recycled as confirmed by the
recycling symbol
.
Components
Many parts in the heater can be fully recycled in the end of the
product life. Contact your city authorities for information about
the disposal of recyclable products.
Saving water resources:
▶ Make sure you close all the taps after any use. Avoid leaving
the taps dripping. Repair any leaking tap.
▶ Define the temperature you want, in the appliance or with
the remote control. This way you have the precise water
flow needed (mixing cold water to regulate temperature will
increase the water flow with consequent waste of water).
76
15
Installer Checklist to be completed by
installer upon installation
Serial Number
(8 digit serial number is
located on rating plate
on right side panel)
1)
Gas Pressure Reading
Static
Operating
Water Pressure
Building Water Pressure
Range if on Well system
Installing Company
Installer name
Address
Phone
1) See Chapter 4.14, page 46 and gas pressure table (to be
filled out by installer)
Table 48
Installation manual should be left with the owner after the
installation is tested and completed.
830 ES – 6 720 644 936 (2021/08)
___ ___ ___ ___ ___ ___ ___ ___

Advertisement

Table of Contents
loading

Table of Contents