Sony HANDYCAM DCR-DVD910 Operating Manual page 76

NOWE SETTINGS {Co_i_ed}
P,ON
Always displays the remaining media
capacity indicator.
AUTO
Displays the remaining recording time of
movie for about 8 seconds in the following
situations.
When your camcorder recognizes the
remaining me(li i capacily when Ihe
POWER swilch is set Io _ (Movie).
When you press DISP/BATT INEO to
switch the indicator from off to on when
the POWER switch is set to _ (Movie).
When you select the movie recording
mode on the HOME MENU.
0 Notes
• When lhe remaining recordable time tor movies
is less than 5 minutes, the indicator slays on the
screell.
Yuu can display the recording date and time
when playing back a disc on a device with a
subtitle display function. The default setting
is [ON].
Also refer to the instructiun manual of the
playback device.
0 Notes
• You cannot set [SUB-T [)ATE] tin"a "Memoly
Slick PRO Duo."
You can set this functiun when you recurd
still images using the built-in flash, or an
external flash (optional) that is cumpatible
with your camcorder.
P,.AUTO
Automatically flashes when there is
insufficient ambient light.
ON (,_)
AI_ ays llashcs regardless of the
surrounding brightness.
OFF(_)
Records without flash.
(J Notes
• Tile recommended distmlce 1o file subjecl when
using the buih-in flash is approximately 0.3 to
2.5 m 11 to 8 feet).
• Rmnove any dust trom tile surt_lce of the flash
lamp betk_rc using it. Flash ettcct may be
impaired if heal discoloralion or dust obscures
file lamp.
• _/CHG lamp (p. 123) flickers while charging
the flash, and remains lil when charging is
complele.
• If you use the flash when shooting a backlit
subjecl or in brighl places, lhe flash may not be
ell :clive.
You can set this fimction when yuu record
still images using the built-in flash, or an
external flash (optiunal/that is compatible
with your camcorder.
HIGH(_+)
Makes the flash level higher.
P, NORMAL(_ )
LOW(_-)
Makes the flash level lower.
You can set this function when you record
still images using the builtqn flash, or an
external flash (optional) that is compatible
with your camcorder. If you set [FLASH
MODE[ (p. 761 to [AUTO] or [ON] when
[REDEYE REDUC] is set to [ON],
appears ou the screen. You can prevent
redeye by activating the pre-flash befure
recording.
76