Table 5-3-1 Display
Item
Description
①
SOC
②
③
System status
④
Heating state
⑤
Network status
⑥
Battery module
status
5.4 System configuration
a.
Download and install PowerLite APP
The battery parameter setting and remote monitoring can be realized through the APP software
(PowerLite), please go to the App Store or Google Play to search for "PowerLite" to download and
install.
b.
Network configuration
1) Turn on the Wi-Fi and Bluetooth signal on your phone
2) Click Register to go to register an account
Enter the registration interface and fill in the information, after receiving the verification by email,
enter the verification code to complete the registration.
Note: If you have already registered a login account, please ignore this step.
3) Configure the network
(You can check the Bluetooth SN code of the battery device at the antenna position of the control
Function
Digital display of real-time state of charge (SOC)
[Constant on] discharging / idling, lit-up blue bar shows SOC.
[Flashing] charging (last bar in counterclockwise direction)
[Constant on] normal
[Flashing] system fault
[Constant on] heating function activated,
[Off] heating function is not activated
[Constant on] Wi-Fi network connection successful
[Flashing] Wi-Fi network is not connected
[constant on] battery module is normal
[Flashing] battery module fault
①
25
②
③