Establishing A Connection Between The Ssh Client And Server - HP 3600 v2 Series Configuration Manual

Step
1. Enter system view.
2. Enable the switch to support
first-time authentication.
Disabling first-time authentication
For successful authentication of an SSH client not supporting first-time authentication, the server host
public key must be configured on the client and the public key name must be specified.
To disable first-time authentication:
Step
1. Enter system view.
2. Disable first-time
authentication support.
3. Configure the server host
public key.
4. Specify the host public key
name of the server.

Establishing a connection between the SSH client and server

Command
system-view
ssh client first-time [ enable ]
Command
system-view
undo ssh client first-time
See "Configuring a client's host
public key"
ssh client authentication server
server assign publickey keyname
314
Remarks
N/A
Optional.
By default, first-time authentication
is supported on a client.
Remarks
N/A
By default, first-time authentication
is supported on a client.
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
N/A