Disassembling Procedures For Alternative Test Setup; Figure 6: Rf Block Insertion - Motorola MXP600 Manual

MN006362A01-AL
Chapter 4 : Test Setup and Testing

Figure 6: RF Block Insertion

Number Description
1 VA connector seal
2 RF plug
3 RF block
4 Thumb screw
4.1.2

Disassembling Procedures for Alternative Test Setup

Procedure:
1 Loosen the screw completely by turning the screw counter-clockwise.
2 Press the RF block towards the Back Cover slot during the screw removal until the screw is fully
loosen to avoid any damage to the RF plug.
3 Gently remove the RF block horizontally backwards. Be careful not to exert any side force to the
RF plug before it is fully removed from the chassis slot.
Example:
34
1
4
2
3